building. climate. excellence.
building. climate. excellence.
As with Meiflow XL Sol 2R-SD-SC, however, with integrated Energie Pro controller.
With two recirculation pumps (DN 15, installed length 130 mm) with connection cable; two flow rate limiters; stainless steel plate heat exchangers; two bleeding devices; one primary sensor seat; four shut-off ball valves; four flushing, filling and draining ball valves including hose fittings and including safety groups for primary and secondary side; all installed and tested on a baseplate; stainless steel corrugated pipe connections with insulation. In EPP thermal insulation housing.
Separation system type | ||
Meiflow XL Sol 2R-SD-SC 1 - 13 | MeiFlow XL Sol 2R-SD-SC 8 - 30 | |
Collector surface | up to 31 m2 | up to 71 m2 |
Operating temperature | Up to 110 °C, short periods 120 °C (observe max. permissible temp. of the pump) | До 110 °C, короткочасні періоди 120 °C (дотримуйтесь максимально допустимої температури насоса) |
Manometer indicated range | Primary: 0 - 10 bar (accessories) secondary: 0 - 4 bar (accessories) | Primary: 0 - 10 bar (accessories) secondary: 0 - 4 bar (accessories) |
Heat exchanger plate number | 30 | 30 |
Max. output: primary 60 / 30 °C secondary 20 / 50 °C min. Residual delivery head primary 0.2 bar / sec. 0.1 bar) | 18 kW (power with 31 m2 surface at 65% efficiency) | 46 kW (power with 71 m2 surface at 65% efficiency) |
Safety valve | Primary: 6 bar secondary: 3 bar | Primary: 6 bar secondary: 3 bar |
Volumetric flow limiter | 1 - 13 l/min | 8 - 30 l/min |
Sealing material | PTFE (Teflon), asbestos-free fibre sealant, EPDM | PTFE (Teflon), asbestos-free fibre sealant, EPDM |
Components made of | Steel, brass, glass, EPP insulation | Steel, brass, glass, EPP insulation |
Lower connection | 1" F | 1" F |
Expansion vessel connection | 3⁄4" M (accessories) | 3⁄4" M (accessories) |
Axial distance | 65 mm | 65 mm |
Dimension | Approx. H 730 (1135) × W 500 (570) × D 250 mm | Approx. H 730 (1135) × W 500 (570) × D 250 mm |
Flamco has been involved in the development, production and sale of high-quality components for use in HVAC systems since 1956. It is part of the stocklisted Aalberts NV, instituted in 1975. Along with Comap, which helps manage water and energy through its thermal and sanitary products that increase comfort in buildings, the Aalberts hydronic flow control business unit was constituted. Stronger together, Flamco and Comap will continue to build mission critical technologies to manage heating and cooling humanly with better financial and environmental efficacy. From source to emitter we partner with our customers to engineer seamless energy efficient hydronic systems for their building requirements.
comap.aalberts-hfc.com | aalberts-hfc.com
Stay up-to-date. Subscribe to our newsletter.
I agree to the processing of my personal data. Aalberts hydronic flow control attaches importance to your privacy.