The Flamcomat Starter has no membrane, which can wear out, but rather, a pressure-maintaining expansion tank. And an automated pump that de-gasses optimally, thus limiting the corrosion of the installation system. This makes the new range very cost-effective.
The Flamcomat Starter effectively absorbs pressure differences by expanding and contracting water volume in heating and cooling systems. This pressurized, closed system prevents gas formation and thus dirt accumulation, corrosion and wear.
The system consists of an automated pump and a membrane-free expansion tank. When warming, the volume of water and the installation pressure increases accordingly. As soon as the installation pressure rises, the control system automatically opens a valve through which expanded water enters the tank. A localised pressure drop occurs, which causes the water to de-gas. By storing expanded water in the tank, the automatic system keeps the system pressure almost constant. During this process, gases present in the water are discharged out through the air vent. When cooling, the volume of water contracts and the installation pressure decreases accordingly. The pump starts and transfers water from the expansion tank back into the system.
The Flamcomat Starter degasses without a membrane. Thanks to the aeration stopper, a cyclical vacuum is created in the tank when it cools down. The control system keeps the expansion tank within the permissible operating range. Advanced technology delivers low energy consumption and long service life, requiring minimal maintenance.
The Flamcomat Starter is an excellent alternative for small to medium installations in buildings with a static height of up to 25 meters and 2.5 MW heating power. You have a choice of 5 tank volumes and 4 automated pumps.
As a professional, you require a reliable installation. Whether it’s for heating or cooling applications. So, you can benefit from an expansion system that optimally absorbs pressure differences. Without the disadvantages of system gas formation, which can cause malfunctions and loss of efficiency.
Наші фахівці перебувають у постійному пошуку передових технологій, щоб адаптуватися до зростаючих вимог до стійких та енергоефективних установок. Під брендом Aalberts гідравлічного регулювання потоку Flamco та Comap виробляють рішення від джерела до випромінювача.
Оскільки кожен заслуговує на оптимальний комфорт, світ потребує екологічно чистих технологій опалення та охолодження, а наші клієнти потребують універсального спеціаліста з інноваційних гідравлічних рішень.
aalberts-hfc.com
comap.aalberts-hfc.com
підписатися на нашу розсилку
Я даю згоду на обробку моїх персональних даних. Компанія Aalberts гідравлічний контроль потоку надає великого значення вашій конфіденційності.